China C Series Jaw Crusher: Advanced Technology from Reliable Suppliers and Factory for High Capacity Crushing
Working Principle
Application of modular construction and no-welding designs remove stress concentration and improve the service life. If it is difficult to transport or install the whole machine on the site, the frame construction series jaw crusher can be disassembled and then installed that reduces the freight and installation cost.
After long-term operation, the parts of jaw crusher are easier to be checked and replaced than those of welding or casting structures, which reduces the maintenance and operation cost.
The front plate, movable jaw plate, back plate, bearing base and other parts are made of high quality cast steel. Heavy eccentric shaft is made of high alloy steels with process of smithing, fault detection, impact extrusion and other special techniques. Four aligning roller bearing and high performance dustproof sealing resist the impulse load and severe atmosphere.
The adjusting system of jaw crusher adopts shim block structure, staff gauge and special gear system to simplify the adjustment of discharge opening.
The belt wheel of motor adopts probe-drogue connection to simplify the maintenance. Customers can use their needed belt wheel to meet their capacity.
Integrated motor and main frame structure save the space, shorten the length of V-belt and reduce vibration of V-belt so that the life of V-belt will be longer.
Jaw plates are made of high manganese steels with metallographic checking. The connection of jaw plates are processed with mechanical workout. All of these improve the crushing ratio.
Guide chute ensures the material to be fed in to the crushing cavity. It is not necessary to remove the guide chute while replacing the jaw plates.
It is easy to unload the guide chute in other maintenance. The protective cover avoids the materials splashing, protects the workers and facilitates the supervision of operation.
Technical Parameters Of Pe Series Jaw Crusher
| Model | C96 | C110 | C125 | C140 | |
|---|---|---|---|---|---|
| Feeding opening size(mm) | 600×900 | 750×1060 | 950×1250 | 1070×1400 | |
| Max feeding size (mm) | 500 | 630 | 800 | 900 | |
| Motor power( KW) | 90 | 110 | 132/160 | 185/200 | |
| Product size(mm) | Discharge size(mm) | Capacity (T/h) | Capacity (T/h) | Capacity (T/h) | Capacity (T/h) |
| 0-90 | 60 | 120-155 | - | - | - |
| 0-105 | 70 | 140-180 | 150-195 | - | - |
| 0-120 | 80 | 160-210 | 170-225 | - | - |
| 0-135 | 90 | 180-235 | 190-245 | - | - |
| 0-150 | 100 | 200-255 | 215-280 | 290-380 | - |
| 0-185 | 125 | 250-320 | 265-345 | 350-455 | 385-500 |
| 0-225 | 150 | 300-380 | 315-410 | 410-535 | 455-590 |
| 0-260 | 175 | 330-440 | 370-480 | 470-610 | 520-675 |
| 0-300 | 200 | - | 420-545 | 530-690 | 590-765 |
| 0-340 | 225 | - | - | 590-770 | 655-850 |
| 0-375 | 250 | - | - | 650-845 | 725-945 |
Some Of Our Product
Frequently Asked Questions
What are the benefits of the modular construction and no-welding design?
This design removes stress concentration and improves the overall service life of the jaw crusher. It also allows the frame construction series jaw crusher to be disassembled for easier transportation and installation, which reduces freight and installation costs.
How does the jaw crusher reduce maintenance and operation costs?
After long-term operation, the parts of this jaw crusher are much easier to inspect and replace compared to traditional welding or casting structures. Additionally, maintenance is simplified by a probe-drogue belt wheel connection and an easily unloadable guide chute.
What high-quality materials are used in the components?
The front plate, movable jaw plate, back plate, and bearing base are made of high-quality cast steel. The heavy eccentric shaft is made of high-alloy steels with advanced smithing and fault detection. The jaw plates are constructed from high manganese steels with metallographic checking to improve the crushing ratio.
How is the discharge opening adjusted?
The adjusting system features a shim block structure, a staff gauge, and a special gear system, which simplifies the process of adjusting the discharge opening for operators.
What are the specifications and capacity of the C110 model?
The C110 model has a feeding opening size of 750×1060 mm, a maximum feeding size of 630 mm, and runs on a 110 KW motor. Depending on the discharge size (ranging from 70 to 200 mm), its capacity varies from 150 to 545 T/h.
Do I need to remove the guide chute when replacing the jaw plates?
No, it is not necessary to remove the guide chute while replacing the jaw plates. The guide chute is designed to ensure material is fed directly into the crushing cavity and can be easily unloaded during other maintenance procedures.