High-Efficiency PE Series Jaw Crusher for Sale - Top China Suppliers & Factory for Mining and Construction
Working Principle
Motor drives belt and belt pulley, makes moving jaw up and down through eccentric shaft. When the moving jaw is up, the angle between lining plate and moving jaw becomes large, and this will push moving jaw plate close to the fixed jaw plate. During this process, the material is crushed and ground, thus the crushing will be done. When the moving jaw is down, the angle between lining plate and moving jaw becomes small, the moving jaw plate will leave the fixed jaw plate on account of the effect of pulling bar and spring, and then the crushed material will be discharged from the lower opening of the crushing room. With the motor continuously rotating and the material periodically crushed and discharged by the crusher, the mass production can be realized.
Technical Parameters Of Pe Series Jaw Crusher
| Specification | Size of Feed Opening (mm) | Max Feeding Size (mm) | Discharge Opening (mm) | Capacity (t/h) | Power (kW) | Dimension (mm) | Weight (t) |
|---|---|---|---|---|---|---|---|
| PE-150×250 | 150×250 | 125 | 10-40 | 1-5 | 5.5 | 670×820×760 | 0.81 |
| PE-250×400 | 250×400 | 210 | 20-60 | 5-20 | 15 | 1160×1300×1240 | 2.8 |
| PE-400×600 | 400×600 | 350 | 40-100 | 16-65 | 30 | 1480×1710×1646 | 7 |
| PE-500×750 | 500×750 | 425 | 50-100 | 45-100 | 55 | 1800×1796×1940 | 12 |
| PE-600×900 | 600×900 | 500 | 65-160 | 60-160 | 75 | 2235×2210×2380 | 17 |
| PE-750×1060 | 750×1060 | 630 | 80-140 | 90-320 | 110 | 2430×2302×3110 | 29 |
| PE-800×1060 | 800×1060 | 640 | 100-200 | 110-350 | 110 | 2530×2310×3110 | 30 |
| PE-870×1060 | 870×1060 | 685 | 170-250 | 160-390 | 110 | 2830×2410×3110 | 31 |
| PE-900×1200 | 900×1200 | 750 | 95-210 | 140-450 | 132 | 3789×2826×3025 | 50 |
| PE-1000×1200 | 1000×1200 | 850 | 110-235 | 160-550 | 160 | 3889×2826×3025 | 57 |
| PE-1200×1500 | 1200×1500 | 1020 | 150-300 | 400-800 | 185 | 4590×3342×3553 | 100.9 |
| PEX-250×750 | 250×750 | 210 | 25-60 | 15-30 | 22 | 1750×1500×1420 | 5 |
| PEX-250×1000 | 250×1000 | 210 | 25-60 | 16-52 | 30 | 1940×1650×1450 | 7 |
| PEX-250×1200 | 250×1200 | 210 | 25-60 | 20-65 | 37 | 1940×1850×1450 | 7.7 |
| PEX-300×1300 | 300×1300 | 250 | 25-70 | 25-90 | 55 | 2285×2050×1750 | 11 |
Some Of Our Product
Frequently Asked Questions
What is the working principle of the PE Series Jaw Crusher?
The motor drives the belt and pulley, moving the jaw up and down via an eccentric shaft. When the moving jaw goes up, the angle between the lining plate and moving jaw increases, pushing the moving plate close to the fixed plate to crush the material. When the jaw goes down, the material is discharged from the lower opening.
How does the jaw crusher discharge crushed materials?
When the moving jaw goes down, the angle between the lining plate and the moving jaw becomes small. The moving jaw plate leaves the fixed jaw plate due to the pulling bar and spring, letting the crushed material discharge from the lower opening of the crushing chamber.
What is the capacity range of the PE-600×900 Jaw Crusher?
According to the technical parameters, the PE-600×900 jaw crusher has a processing capacity range of 60 to 160 tons per hour (t/h).
What is the maximum feeding size for the PE-1200×1500 model?
The maximum feeding size for the PE-1200×1500 model is 1020 mm, with a corresponding capacity of 400-800 t/h.
How is continuous mass production achieved with this machine?
Continuous mass production is realized through the motor's continuous rotation, which allows the jaw crusher to periodically crush and discharge materials in a consistent cycle.