High-Precision Z Series Micro-Powder Grinder - China Suppliers Factory for 325-3000 Mesh Materials
Working Principle
The main motor drives the spindle and turntable to rotate through the reducer, and the roller pin at the edge of the turntable drives dozens of grinding rollers to roll in the grinding ring raceway. The bulk material is broken into small particles by the hammer crusher and sent to the storage bin by the elevator, and then through the vibration feeder and the inclined feed pipe, the material is evenly sent to the bulk tray on the upper part of the turntable. The material is scattered around the circle under the action of centrifugal force, and falls into the raceway of the grinding ring, which is impacted by the ring roller, rolled and ground, and becomes powder after the processing of three layers of ring paths. The high pressure fan inhales the external air into the machine through the suction effect, and brings the crushed material into the powder separator. The rotating impeller in the separator makes the coarse material fall back and re-grind, and the fine powder that meets the requirements enters the cyclone powder collector with the air flow and is discharged by the discharge valve at the lower part of the product, while the air flow with a small amount of fine dust is discharged through the fan and muffler after the pulse dust collector.
Technical parameters of Z series micro-powder grinder
| Model | Max feeding size (mm) | Final product size (micron) | Capacity (T/h) | Speed of main mill (R/min) | Main unit power (Kw) | Dimensions (L×W×H) (m) |
|---|---|---|---|---|---|---|
| Z-80 | <10 | 5-47 | 0.4-4.5 | 240 | 145-165 | 13.9×4.2×6.8 |
| Z-100 | <10 | 5-47 | 0.7-7.5 | 200 | 263-270 | 18×4.6×9.3 |
| Z-125 | <10 | 5-47 | 1.5-12 | 150 | 380-430 | 14.5×9.3×10.8 |
Some Of Our Product
